Axis Communications P1343 Manual do Utilizador descarregar pdf (Página 7)

AXIS P1343 Network Camera

Hardware overview

• Digital input — An alarm input for connecting device s that can toggle between an open and closed circuit, for

example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and

the input becomes active (shown under System Options > Ports & Devices).

Note

The I/O connector is connected to the housing (fan/heater) on delivery, an d will trigger an input port event to ind icate

a fan or heater error when activated. See Events, on page 33 for i nformation on how to set up an event.

Function Pin Notes

Speciﬁcations

GND

Ground

3.3 V DC Power

Can be used to power aux iliary equipment.

Note: This pin can only be used as power out.

Max load = 50 mA

Digital Input

Connect to GND to activate, or leave ﬂoating (unconnected)

to deactivate.

0to+40VDC

Digital Output

Internal connection to ground when activated, ﬂoating

(unconnected) when deactivated. If used with an inductive

load, e.g. a relay, a diode must be connected in parallel with

the load, for protection against voltage transients.

Max load =100 mA

Max voltage = +40 V DC

3.3 V max 50 mA

LED indica tors

LED

Color

Indication

Green

Steady for conne

ction to a 100 MBit/s network. Flashes for network activity.

Amber

Steady for connection to a 10 MBit/s network. Flashes fo r network activity.

Network

Unlit No network connection.

Green Steady green for no rmal operation.

Amber

Steady during startup and when restoring settings.

Status

Red

Slow ﬂash for failed upgrade.

1 2 3 4 5 6 7 8 9 10 11 12 ... 57 58

USER MANUAL 1
AXIS P1343 Network Camera 10

Comentários a estes Manuais

Sem comentários

Axis Communications P1343 Manual do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Axis Communications P1343