Axis-communications 250S Manual do Utilizador Página 10
- Página / 57
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Installing the AXIS 250S AXIS 250S User’s Manual
10
Installing the AXIS 250S
This section is intended for use by the product administrator. Operators and viewers should
read Operating the AXIS 250S, on page 14.
• Quick installation - Follow the instructions below to quickly install on an Ethernet network.
• Easy installation - See Using the AXIS IP Installer, on page 35.
• Other Methods - Please refer to Other IP Setup Methods, on page 35.
❹
Using an appropriate method for your operating system, assign your product with a
unique IP address from a computer on your network, as follows:
You will now see ‘
Request timed out...’ messages repeatedly returned in the window.
Note: In some Unix systems, the arp command can be located in a directory that is not on the
command path.
❸Note the Serial number on the
underside of the unit. You need to
know this to set the IP address.
Serial number same as
Ethernet address; e.g.
00408c100086 =
00-40-8c-10-00-86
❷Connect a video source to
the BNC or S-Video connec-
tor. (Use a BNC-to-RCA con-
verter if your source is
supplied with a phono-type
(RCA) connector.) The 75 Ohm
selector switch should nor-
mally be set to ON. If the unit
is connected in parallel (e.g.
with a monitor) set this
switch to OFF.
❶Connect a microphone to the Mic connector, or
an alternative input device to the Line input.
Windows only - Start a Command prompt and type these commands:
Syntax:
arp -s <Server IP address> <Ethernet address> <my PC IP address>
ping -t <Server IP address>
Example:
arp -s 172.21.1.200 00-40-8c-10-00-86 172.21.1.193
ping -t 172.21.1.200
UNIX only - Type this in your command line:
Syntax:
arp -s <IP address> <Ethernet address> temp
ping <IP address>
Example:
arp -s 172.21.1.200 00:40:8c:10:00:86 temp
ping 172.21.1.200
- AXIS 250S MPEG-2 Video Server 1
- AXIS COMMUNICATIONS 2
- Table Of Contents 3
- AXIS 250S User’s Manual 4
- Introduction 5
- Applications 7
- Product Description 8
- Hardware Inventory 9
- Installing the AXIS 250S 10
- Client System Requirements 11
- Operating the AXIS 250S 14
- Access from a browser 15
- The Live View Page 15
- Disconnected Video Source 16
- Configuring Event Types 17
- Setting up a new event type 17
- General 18
- Respond to Trigger 18
- Trigger Type 18
- When Triggered 19
- Adding an Upload Server 20
- HTTP Notification 21
- Audio & Video Settings 22
- Port Status 23
- Preset position setup 24
- Live View Layout 25
- Accessing The System Options 26
- System Options Overview 27
- Adding Users 28
- Editing and Deleting Users 28
- Adding Allowed IP Addresses 28
- Current Server Time 29
- New Server Time 29
- Automatic IP Configuration 30
- Manual IP Configuration 31
- Network Traffic 32
- IO Ports 32
- COM-Port 33
- The Factory Default Settings 34
- Using the AXIS IP Installer 35
- Appendix B - Troubleshooting 37
- PINGing Your IP Address 38
- Obtaining Updated firmware 41
- Updating the firmware 41
- Modifying the File System 42
- Configuration via FTP 42
- Customizing Procedures 43
- Creating a New Home Page 45
- Appendix E - Unit Connections 46
- Connecting Pan/Tilt Devices 48
- Transistor Output 49
- Digital Inputs 49
- Input1=0 50
- Input2=1 50
- Input3=0 50
- Input4=0 50
- Appendix G - Bandwidth 53
- Other Considerations 54
Asus P4B manuales
Manuales del propietario y guías del usuario para Madre De Los Servidores / Estaciones De Trabajo Asus P4B.
Ofrecemos 1 manuales en pdf Asus P4B para descargar gratis por tipos de documentos: Guía de usuario
Comentários a estes Manuais