Axis Communications T95A00 Manual do Utilizador descarregar pdf (Página 8)

Page 8 AXIS T95A00/T95A10 Dome Housing

AXIS 233D

As the camera is not yet installed in the housing, this is a preparatory step

showing how to connect the brown cables from the 24V connector to the

8-pin green connector block (supplied with the camera). When the

camera is later installed in the housing, this connector block will then be

connected to the camera itself. Referring to the connection diagram on

the right, connect the brown cables for your version of the T95A.

• AXIS T95A00 Dome Housing (24V DC)

Connect +24V to AC/DC+

Connect -24V to GND/DC-

• AXIS T95A10 Dome Housing (24V AC)

Connect +24V to AC/DC+

Connect -24V to AC.

Prepare the cable gland plate

Fix the 3 cable glands to the cable gland plate and place the cable gland plugs on them. Insert the

four M3 screws through the gasket and plate.

The preparation for the network camera installation is now complete.

AXIS 233D

Connector

AC/DC+

GND/DC-

12V out

GND

Line out

GND

Line/Mic in

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 82 83

Sem comentários

Axis Communications T95A00 Manual do Utilizador Página 8